1997 Chrysler Sebring "car starter spins bendix engage" Questions

...starter while you try to start the car. This usually works by dislodging a stuck bendix gear. Make a simple test of the alternator: If you can, somehow get the engine running, measure the voltage at ...

...starter!! That worked on a stuck bendix in OLD STYLE STARTERS. Newer starters have large magnets just under the casing that can so very easily be SHATTERED and completely destroyed by doing this. Old ...

...starter. Hello there: The spinning that you are hearing is the bendix spinning there is a engagement spring that forces the bendix to engage on the flywheel If this spring is weak or broke the bendix ...

...car wont start 2006 mazda 3 the starter is spinning but not engaing the engine to turn over Not because of jumping another car though. Starters have a bendix that engages the flywheel and if the ...

...starter, and it won't engage, just spins up. I inherated the car, it had a new engine and clutch installed in 2009, and it has been a on going problem. thanks db. If it just spins when you turn the ...

...STARTER CLUTCH BENDIX Depends on type of starter motor, some have a bendix some are pre engage. If bendix the shaft may need lubricating to allow the dog to move. If pre engage type, check for a ...

...starter bendix is most likely bad or sticking. The bendix is responsible for kicking the starter drive gear into the flywheel. On some starters the bendix can be replaced but if unsure of how to ...

...car at the Starter. If you just have the main heavy gauge cable going to the Starter, the answer is no. The Starter is spinning and the Bendix drive is bad. If you have Solenoid wires in addition to ...

...starter just spins, does not engage with flywheel.car will not start Sounds like the the Bendix is bad in the starter, which pushes out the drive gear to engage the flywheel. You'll need to replace ...

...starter bendix isnt engaging, if your replace your starter your problem should go away. The rappid ( firing ) you are hearing is the starter spinning but the bendix isnt moving out and engaging the ...