1997 Chrysler LHS "codes spark" Questions

Code p305 P0305 Code - Cylinder #5 Misfire Detected A P0305 code means that the the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #5

car starts, but stops immediately. I have good fuel pressure, and no fault codes came up. The car is getting spark, but I have to check again for color of spark. check maf sensor

misfire p0306 spark could a bad injector cause my car to have a code p306 it is a 1999 lhs. it is not the spark plug or the cylinder yes if you have got a good spark then a faulty injector could be ...

...spark, so know i dont know what to do. please help me i really need my car fixed. thanks for your time and input. The crank and or the cam sensor has failed. If you have no way of pulling codes or ...

97 chrylser LHS codes 32, 43 where can I find a definition for the codes on this auto? 32 is EGR valve malfunction 43 is ignition control circuit or spark interface circuit malfunction

2002 jeep liberty, engine light on. Code p0305, and #12 abs. Cylinder 5 misfire detected. Replace spark plugs. Engine light still on and same code. Wich on is #5 cylinder? 2.4L is 1-2-3-4 3.7L 2-4-6 1

...spark plugs and coil packs but didnt help Try getting the codes from the computer. Try turning the key on, off, on, off, on (without starting the vehicle) within 4-5 seconds.....this should "get you ...

spark coil. The resistance between the center contacts of each pair of towers should be in the range of 11,500 to 16,000 ohms. The wires themselves also have resistance built-in to reduce radio noise.

Good Morning I'm having a problem with my chrysler 1996 lhs, It will turn over but want start. Fuel pump has been checked. what else could it be?? try the cam shaft sensor, or just get a code tester ...

The diagnostic test shows no signal from camshaft sensor. I checked all the wires for breaks, and I replaced the camshaft sensor code (0340). The car turns over good, but it will not start. Any ideas ...