...How do I fix this. firstly i would have my wiring checked, or it could be dropping of its railing it sits in, maybe broken catch, or tightening up a screw......hope ya get it sorted thanx ...
...SWITCH AND THE PROBLEM SHOULD BE SOLVED. THE FIRST SIGN OF THE NEUTRAL SAFETY SWITCH GOING BAD IS NOT STARTING IN PARK. KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD ...
...is off) then there would be no heat but alo the car would over heat Good luck and thanks for using FIX ...
The bottom of the sensor is located next to the drive plate (flywheel). Should you need further help please just ask.Please rate the answer. This way i know it was helpful. Thank You for using Fix Ya
...be a rectangulor female connector. Should you need further help please just ask. Please rate the quality of this answer as this way we know the answer was correct. Thank You for using Fix Ya. ...
...you should see a round sensor with a wire lead out of it. This should be the sensor you want. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. ...
...BUT JUST CHECK THE CODE TO BE SURE. SOME OF THESE CAN ALSO HAVE A BAD IDLE AIR CONTROL VALVE. I HOPE THIS HELPS YOU TO FIND THE PROBLEM. PLEASE KEEP ME POSTED, THANKS FOR USING FIX-YA. GOOD ...
...with a plunger in the end that faces the 90 degree bracket. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. ...
on left side. check the transmission fluid first then check power steering fluid. If either is low do not drive it or you could destroy the pump on either one. Hope this helps. Thanks for using fix-ya
...the compressor cycle and that will allow you to recharge the system. Good luck and thanks for using FIX ...
788 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions