1996 Chrysler Town & Country "fan motor stoped running" Questions

...fan, thermostat, and water pump. These are the main components and by process of elimination, I would suspect the water pump. Hope this helps and best wishes. first check to make sure ur radiator is ...

...motor will probably run if you take it out and turn the fan slightly problem is when you put it back together it will not work the next time you turn it on. I thought I had mine fixed only to find it ...

...fan motor windings for continuity with an electrical tester. If you don't get continuity, you have a burned wire. If you get continuity on the windings, don't forget to check if you have continuity ...

...motor. When you turn the fan to the high position the fan runs at full speed because it is getting 12 volts. Now some switches use a electronic board to control the speed. You need to do a search and ...

...fan/heat only worked on high and as of yesterday stoped working at all, and when i used to turn the heat on my signal lights will stop working. Could this be a fuse problem or i need to get my self a ...

...stoped running most if not all of the relays in the engine compartment are bypassed (by previous owner) car was running fine up until the backfire then it died currently the car has a 305 tbi motor ...

MOTOR CHECKED AND IT WORKS AND IT WORKS AS WELL AS THE COMPRESSOR BUT NOTHING BLOWS OUT OF THE VENTS IN A 1984 GRAND PRIX i have the same problem on my 84 grand prix..ther is black wire that heat runs

...the wire and check the relay,and as well the motor fan can be tested by by removing the socket by the use of reader,to see if the motor fan is ok or faulty.and if the fan is ok then it might be

...motor to the fan in a couple of days. I know that the cooling fan will help with my cars operating temperature. But, I am concerned about my compressor. I am hoping that is not the problem, because I ...

fan motor may be seized. Should ingage between 95-100 degrees when you parked on idle after achieving full working temp. If it doesn't, check fuse first and than relay responsible for cooling fan( you