Question about Chrysler Town & Country
mode actuator. ?€¢ B0408 is for the left air temperature actuator. ?€¢ B0418 is for the right air temperature actuator. The HVAC control module controls the HVAC door actuators to regulate the airflow
...and it moved, so i think its the contol panel. not sure? GM had problems with the mode door actuater's.they stripped gear's internally.kinda hard to change,but can be done without case
Question about Chrysler Town & Country
...change the position of the mode doors , controlling where the air comes out of an the temp. ! This HVAC system can set DTC'S - diagnostic trouble codes Air Temperature Actuators The air temperature ...
Question about Cadillac Cars & Trucks
...mode door is moved to the defrost position, the A/C compressor clutch engages and the re circulation actuator will be moved to the outside air position. Auxiliary Air Distribution The auxiliary HVAC ...
Question about Chrysler Town & Country
...mode. If the discrete ignition input is not active, open or 0 voltage, the modules will fail-safe to OFF-AWAKE. In this state the modules are constantly checking for a change status message on the ...
...actuator or actuator or door failure or calibration,if you hear a clicking noise when changing to vent mode under dash area this indicates the actuator internally slipping and will need to be ...
...door lock control switch inhibit feature state. Turn the key to OFF to exit programming mode. This feature can also be enabled/disabled using a diagnostic tool. Auto-lock Enable/Disable - Using the ...
788 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions