Question about Chrysler Concorde
I have a 1997 chrystler concorde. We just replaced the cv axles and bearings because the front end was shaking badly. Now I hear a humming noise in the front end that starts at 35 and gets louder on e
...axle. 3.5 L engine - is this a front wheel drive car If it makes a clicking noise when turning it could be the axles. Check the rubber axle boots and see if they are torn open. If they are that lets ...
front axle removal remove the axle stub retaining nut, disconnect the lower ball joint, disconnect the tie rod end, pull the spindle out and away from the axle stub tapping on the end of the stub if ...
front axle and boot My Father seems to replace the front right axle and boot on his 2000 Concorde quite often. Is / does anyone else having to do this? Mechanics tell him he has hit something to cause
...front wheel bearing (hub assembly) replacement jack up vehicle wheel in question and install jack stand.remove wheel. Unbolt 2 caliper bracket bolts and pry caliper assembly up off brake rotor and ...
noise in front suspension when traveling over bumpy road. have already replaced struts. car has 177,000 miles on it and just replaced the struts. no other suspension parts have been replaced. seem to ...
axle will have to be removed to replace the seal. Look at the bottom pan of transaxle. If leaking from pan gasket, the pan will have to be removed and transmission drained to replace pan gasket. There
232 questions posted
Usually answered in minutes!
439 Questions
405 Questions
313 Questions
291 Questions
285 Questions