...the dimmer light hasnt been moved?If no luck with dimmer youll have to remove dash to change the bulbs.Anyway good luck and happy new
short in rear tail light assembly no back up lights no brake lights on drivers side only 1995 cirrus Could be a bulb that has blown and shorted out internally - so test all bulb resistances b4 looking
Question about Chrysler Cirrus
trying to change headlight bulb but can't get hand in there to get it out trying to change passenger side head light bulb , can't get hand in there to remove the old one You may have to ...
and the only one that works is the one in the middle of the trunk. I tried to replace only 2 of the bulbs for the bigger lights but nothing worked. Should I change all of the bulbs, could it be a fuse
Reverse lights do not work on a 1995 Cirrus when gear is in reverse? try fuse first then replace bulbs, if neither then its a sensor
why does my 2000 chrysler cirrus not have brake lights? have changed fuses and bulbs I would say it is your break switch. It is located under the dash, above your gas and break pedal. This will solve ...
brake lights don't work replaced bulbs, lights work, turn signals work, brake lights still won't come on? Check your fuse.
main brake lights don't work checked and changed bulbs center light works others don't check fuses first, then brake light switch, underdash, @ brake pedal. note : may need to replace ...
Driver side headlight is out. How do i fix? Driver side headlight is out. How do i fix? just the low beam not the high beam. change the bulb jus look at the light housing it shouldnt be hard to figure
trying to replace the bulb for brake light but not sure how to remove old bulb without breaking it Depending on your years they will twist out or pull out. And about half the times they break. If it ...
335 questions posted
Usually answered in minutes!
391 Questions
242 Questions
193 Questions
168 Questions
124 Questions