1995 Chrysler LeBaron "loose idler belt tensioner" Questions

Ad

...loose and will keep popping off. If the belt is routed correctly the ONLY two causes are idler pulley alignment and sorry to say your crankshaft pulley moved outward ,not to get too technical, and ...

Ad

Question about Chrysler LeBaron

2 Answers

...idler, if applicable, also could be the culprit. Like other posted reply, check the belt tension with finger or thumb as well. Check all of your pullies and make sure that they are aligned properly ...

Ad

Question about Chrysler LeBaron

2 Answers

...Idler/Tensioner Pulley. 5 Inspect Belt Tensioner Loose or Damaged Belt Tensioner Will Allow Belts To Slip. 6 Inspect Belt Tension Incorrect Belt Tension Will Allow Belts To Slip. 7 Inspect A/C Clutch ...

...loose either the belt size is wrong (if it was replaced recently) or the tensioner is defective or one of the belt idler pulleys is defective. Cannot tightened. The tension is controlled by a ...

Question about Chrysler LeBaron

1 Answer

...loose and I could spin one of the tension/idler pulleys. after I turned the engine a couple of times the belt and pulley seemed tight. Timing belts are supposed to be replaced in intervals, on this ...

idler pulley bolt (not all the way) just enough to break it loose then use the bar against the pulley to tension the belt. If there are parts missing from the idler pulley, a new one must be purchased

Question about Chrysler LeBaron

1 Answer

...start troubleshooting the problem. REPLACE THE TENSIONER IDLER PULLEY.THE TENSIONER IDLER PULLEY MAINTAINS THE BELT TENSION WHEN IT GOES BAD.THAT WILL LEAD TO LOOSE BELT TENSION CAUSING BELT TO

...with a stethescope, the auto repair will try and sell you a new timming chain, the tensioner can be replaced from the out side of the engine The belt may be loose or the tension idler may be

...screw, etc.) there is a bolt attached to the idler arm, if you get the right size socket and a good wrench, you have to pull the idler arm. it will pull the entire tensioner and the belt will be ...

Question about Chrysler LeBaron

1 Answer

idler pully on serpentine belt belt is loose on pully and making noise Your tension spring is shot. purchase a new idler  pulley  and tension arm bracket. that should fix it. 

Not finding what you are looking for?
1995 Chrysler LeBaron Logo

313 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...