...the emergency brake) Also if the noise could be metalic then it could be the brake drum rubbing on the backing plate. SOUNDS LIKE THE PLASTIC FENDER LINER CAME LOOSE FROM THE UNDER SIDE OF THE
Question about Chrysler Cirrus
...license plate bracket on a 2013 dodge journey No holes or bracket on front bumper for the plate. How to install one is what i need Self tapping screws will go right thru the thin plastic bumper
...plastic license plate holder mount to the grill of my car? Most factory kits come with the hardware to install it will be plastic push ins, bolts with j-nuts, or pointed hex head bolts. The push ins ...
Question about Chrysler Cirrus
...bumper from the drivers license plate. how much to repair the bumper ? If its a painted plastic bumper cover and everything underneeth is fine a body shop should only charge around 150 to
Question about Cadillac Cars & Trucks
...plastic clips or screws. 4. **Remove Retaining Clips and Screws:** - Locate and remove the screws, clips, or fasteners holding the bumper cover in place. These are typically found along the top and ...
...bumper guard its made of pvc plastic its rated at a crash rating of 5 mph front end collision its not the actual bumper the bumper is what its bolted to and thats made of a piece of 1/4'' plate
...plate lights on 95 ford explorer. can't reach underneath the bumper. does the plastic assembly just twist off? From underneath the rear of the vehicle, grasp the lamp socket and rotate it 1/4 turn. ...
...plastic panel on the body not bootlid there should be fasteners then trace fasteners at both fender linings and remove all fasteners under the bumper next gently pull both sides of the bumper away ...
Question about Cars & Trucks
...plate called which is just under the front bumper part Number ? 1999 450 es Hello J. Frank Smith, I'm guessing your HONDA ... is not a USA domestic... But several decades back the "bumpers" got ...
Question about Toyota Cars & Trucks
...plate behind the plastic bumper - and I don't want to damage that - I need about 1" (25.4mm) clearance for the sensor behind the plastic... is there is photo or drawing of the back end of a Toyota ...
238 questions posted
Usually answered in minutes!
391 Questions
242 Questions
244 Questions
193 Questions
124 Questions