1995 Chrysler Cirrus "clutch bites high" Questions

...high blow full a/c and the engine idling while filling the system, if the freon wont gho in due to the a/c compressor clutch not engaging jump the new low pressure a/c switch connector out with a ...

clutch is at high biteing point clutch high biteing point The cables on these models are self adjusting so it could be stuck but more likely the problem is a worn clutch that needs replacing.

...high biting point on clutch 41k on clock how do i adjust high biting point so its slipping how do i adjust it plz The clutch is worn out, this system is not adjustable as the clutch disk wears the ...

...is normal or a sign that it's on the way out? thanks in advance :o) Could be about to fail.  The point where the clutch "bites or grabs" is normally half way from floor to top

clutch biting point very high on peugeot 206sw 1.4dhi it it about to fail The reason for the high biting point is simple. The clutch is made of 3 main components. The pressure plate friction plate and

...The clutch pedal has a high bite - almost at the end of the travel before it bites - is the clutch about to go? it is possible, however what is most likely is that the clutch cable needs ...

...with the handbrake on (I wasn't!). The revs go up high but speed max was 20mph. sounds like clutch is slipping (glazed over from riding or not fully engaging clutch at take off) replace ...

clutch peddle, unable to change down from high ratio gears to low ratio gears, having to knock into nuetral pump the clutch to select gears already had master cylinder changed This sounds like you may

85 bmw 325e clutch pedal rises too high If you mean the biting point of the clutch is too high then the clutch needs replacing if it is slipping!

...high how do I adjust it the clutch is hydraulic and I have a inch or less from biting point to no foot on clutch as you hav'nt mentioned vehicle etc as a general rule hydraulic clutch's self adjust , ...