1995 Chrysler Cirrus "changing lower ball joint 95" Questions

...lower ball joint on 95 mercury cougar...do you have to take lower countrol arm off to get ball joint out? i would replace the whole control arm because the bushing are probably worn out too and it's ...

lower ball joints on a 95 Rodeo with 4wd? Unless you have the tools to remove the ball joints to buy the tools costs $250.00 and it's not a easy job and takes several special tools then must be alined

...lower ball joints and tie rod ends now my car is riding rough over the road feels like tire going to fall off. It never did this before until i change the tie rods and ball joints. I'm very confused. ...

...lower control arm, remove the 2 bolts holding the arm in place and install the new control arm. An alignment is recommended when changing any part of the suspension, especially control arms, tie rod ...

95 ford f150 my front wheels are leaning inward what could this be you need upper ball joints, you should consider doing the lowers also, then a front end alignment Some lean can be normal, but if you

...ball joints wear prematurely forcing relacement of lower control arm as well. Replacement joint with grease fitting is now available. (1990-96) Transaxle leak: Automatic transmission fluid leaks from ...

...ball joint. Torque the bolts to the required specification. Clean any rust or dirt from the mounting surfaces of the steering knuckle and the hub/bearing. Using a new O-ring, install the new ...

...ball joint to the steering knuckle and insert a new O-ring around the hub and bearing assembly. Install the hub and bearing, and shield into the steering knuckle. Tighten the bolts to 70 ft. lbs. (90 ...

...lower ball joints too.-------- If it shakes while applying brake then get the front rotors checked, the rotors are wrapped out and needs to be replaced.--------- This will help.Thanks.Helpmech. there ...