1994 Chrysler LeBaron "waterpump" Questions

Ad

Question about Chrysler LeBaron

1 Answer

serpintine belt came off need digram of belt route , and where the waterpump pully is thanks we will need the size of motor... but is there not a sticker just under the hood when you lift it showing ...

Ad

...would be money ahead to go to a parts store and buy a haynes or chilton manual for 20 dollars. The waterpump is ran by the timing belt, so you will want to replace that to. You also need to know how ...

Ad

Question about Chrysler LeBaron

2 Answers

...is leaking. Hi: The water pump can leak out its shaft bearing, and there is a "weep" hole on the waterpump that the water will run out of . There are other possibilities for coolant leaking too, ...

...drive maybe 15 mph and when i tried to go faster it kept cutting out and was lagging really bad The waterpump is driven by the timing belt. If the marks where not lined up properly, these symptoms ...

...Heater is not working properly, it goes back to the same list (Low coolant, Bad Thermostat, or Bad Waterpump). Start off by checking to ensure there is NO AIR in the Cooling system. There is a ...

Question about Chrysler LeBaron

1 Answer

waterpump how to replace waterpump pull out your coolant res.pull off your belt.you will see the old waterpump.remove all four bolts.clean off gasket off waterpump mount on motor.place gasket.install.

Question about Chrysler LeBaron

1 Answer

procedure on changing waterpump first drain the cooling system. loosen bolts on the waterpump pulley and remove the inner fender cover on the pass/side. remove the surpentine fan belt, note; make a ...

...steering belt pulley to change the water pump? no, just remove the belt, then the cover over the waterpump then the waterpump pulley,NOTE; loosen waterpump pulley bolts before removing the ...

Question about Cars & Trucks

1 Answer

rodeo waterpump blew now wont start Why after my waterpump blew (is my 4x4 not running now) it wants to fire but wont.. tried jumpstarting and it turned over really quick. It wanted to start but no ...

Question about Chrysler LeBaron

2 Answers

waterpump removing fan need to remove fan Well, if it's a 5.0L engine, remove the 4 bolts holding the fan to the pulley. If it's a 4.0L engine, you need to hold the waterpump pulley still and break ...

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

349 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...