1994 Chrysler Concorde "heater control valve replacement 94" Questions

...heater core and control valve on heater hose. gets warm, not nearly enough. bled system too. still wont get hot. also replaced thermostat. any other ideas????????? The thermostat should be a 185 Hope ...

...trans. Mike in KCMO I think they are called heater control valves. Haven't seen one of those since my 1958 Buick Super. I believe they turn off the water to the heater core when in AC mode. Good

heater core, I don't know where it is and I can only offer help with your idle problem. It is your idle control valve, it is a very common problem in Honda's. My girlfriends Acura Integra had the same

heater control valve. I've been having a hell of a time trying to find out what those lines are to replace them. I say them because it's like a junction of three lines that meet and go into the valve.

...heater valve. Check the voltage to the valve with the heater controls set to high, if there's no voltage you need to replace the valve. If the valve is working you need to get the sediment out of the ...

...heater control Knob at cold and with the valve in the closed position (visually check this position before installing) and attach clip that holds outer cable. Check for full movement of valve arm. ...

...heater control valve. i am not sure what would be causing it to over heat i am wondering if it could be the radiator, the thermostat, or water pump. How can i determine what the problem is without ...

94 Grand Am SE 3.1. The blower fan barely works. I replaced the fan motor and fan resistor. I also read a post that said take out blower and clean front of evaporator. Well, I tried this but couldn't ...

...Heater -Bank 1 • 27 Idle Control Valve - Malfunction • 29 Ignition Coil Cyl 1 • 30 Ignition Coil Cyl 3 • 31 Ignition Coil Cyl 5 • 33 Fuel Injector Cyl 5 • 35 Aux. Air Injection System Relay • 36 DME ...

...heater control and listen for the door closing. Also ensure that your air circulation lever is set for the car interior. If you can't hear the door operating, you will have to do a visual insp under ...