1991 Chrysler LeBaron "dodge truck hall effect" Questions

...Dodge Spirit V6 (same car basically) behaved exactly the same as your LeBaron, to the extent that he was tired of being left stranded and no longer felt comfortable driving the car. The car was ...

Wiring daigram for ignition system, 1987 dodge Dakota v6 w/ carb. Is the Hall Effect pick-up upstream or downstream of the ignition coil? how can you tell if hall sender is upstream or downstream?

...hall effect electronic ignition system. ignition coil, pick-up coil no spark at the coil or the distributor cap. any idea or perhaps a diagram of the wiring. it's a 1991 dodge dakota v8 - 318 ...

...dodge dakota truck with a 3.9L. there is no fire going to the coil. i have replaced the module and the coil. still won't start. I get code 34 please help me to diagnose this problem. thanks Replace ...

...Dodge Dakota 5.2 318 4x4, turns over, but no spark. Cat converter shot, removed. Plugs, cap, rotor replaced. MAP sensor recently replaced...will start and run once in a great while. Try switching the ...

...Hall effect this is responsible for spark. Code 12 memory cleared you get this when you disconnect battery code 55 on some vehicle it means ECM failure but on your vehicle it means end of message not ...

Dodge Shadow died while driving. It acted like it was running out of gas. I pulled the 4 Spark Plugs and cranked it at night (by myself) to see if there was any spark - NO SPARK AT ALL AT PLUGS. 2.5 L

...computer on a 1992 dodge dakota to set the timming Timing is set by the Crank Position Sensor and Computer. The Hall Effect Sensor in the distributor,is for injector timing. DO NOT MOVE THE ...

...hall effect sensor and how to change it? Take the distributor cap and rotor off! There are two screws,one on the back and one on the front of the distributor! Remove those and the hall effect pick up ...

dodge 600 turbo does the dist. signal come from the power module? Quite often "hall effect pick-up" in distributor is problem . Remove distributor cap and rotor and you'll see the round plate with