1991 Chrysler LeBaron "body" Questions

...won't start. This wouldn't have a car if it's this new I don't believe. It likely has a throttle body fuel injection. If you have an air filter and filter housing on the top of the motor, than

...work for you for quite awhile, i'm a transmission builder, this sounds to me like it needs a valve body clean, all overdrives need this every 100k miles do this first it's cheaper than a rebuild ...

how do you adjust idle speed on 2.5 litre chrysler lebaron engine idle is at 250 rpm after start up you cant it is computer controlled ais stepper motor on the the throttle body

i cant locate neutral safety switch on a 88 labaron. if any body has any advice thanks in advance. It is located on the side of the transmisson where the shifter lever goes in.

91 Labron auto reverse works fine but has a 2 to 3 sec delay before it kicks in (fluid level is full) servicethe filter & valve body in the tranny! heers Rob

Where can I find the auto shutdown relay on a 1991 crysler lebaron 3.0 with a j body? drivers fender by the starter relay

transmission does not completely change all gears. sticky valve body or worn front pump in the transmission

will not shift into drive gear, solid low gear and reverse it will be an enternal problem either with the shifting solenoid or the valve body sticking

...above max.'' what do I do? Replace the throttle positioning sensor. It is located on the throttle body. It has a reostat built inside of it and yours has an open in it giving you this ...

can you use starter fluid for chrysler lebaron? yes u can, but why do u need it? This will work with carberators and throttle body injection as well. Just not multi-port injection