1990 Chrysler New Yorker "check light" Questions

...Check the stop light switch down by the brake pedal. there's 2 wires going to the switch. when the pedal is pressed the little button on the switch comes out and causes the brake lights to come on. ...

...check engine dummy light work, just no speed and gas gauge. checked all light bulbs, and fuses with no easy this is the problem. Can anyone help me ??? okay if the light work then it wont be a fuse, ...

...check oil pressure or fix the problem...that oil pressure low ..warning..red light at idle. Thank you. I think you have a suspect oil pressure sender unit. Replace it as they are cheap and need to be ...

...is off which is draining battery how do i disconnect that wire need to find the wire to disconnect it Find out which light won't go off and check the switch. Is , "truck" light, really , trunk

Signal Lights and hazard lights don't work. The signal lights worked on the way out but not returning home. I have checked the fuses and they are OK for both the signal lights and the hazard lights. ...

...is low or the equalizer valve goes to one side of the system.You should have the hydraulic brakes checked for

...blowing You have the feed wire (HOT WIRE) feeding to a ground, causing fuse to blow. Have wires checked from brake switch to tail lights. Also, possible bad brake switch shorting out. Hope this ...

...CHECK ENGINE light is on. We checked engine codes. Engine codes: 12 & 31 Also, the CHECH GUAGES light turns on when we hit the brakes and the oil pressure drops to 0 bad earth point behind the ...

...light cover, back up lights it does not work at all. and I don't have back up lights check fuses and bulbs first if good replace neutral safty switch for revers lamps and replace cover motors or just ...

...ac or heat.or the turn signals. Had the identical same problems on our Chrysler Concorde. We checked all fuses and relays nothing. Then we checked the wiring on the ignition