...318 looked at close-up photo of engine posted on web. Or take out plug to # 1 cylinder, put finger over hole, turn over engine utill you feel compression, then stick pencil in hole and keep turning ...
318 5.2L compression I am trying to figure out why I have no compression on cylinder 3. All other cylinder compression are to specs. I replaced heads and installed all gaskets and head bolts to torque
...wouldn't stay running. Turns out broken valve spring. It was on a 318. Need a mechanic to do compression test on each cylinder to pinpoint. If it's firing and getting gas it must be compression
...318 tds diesel hard to start in mornings returning diesel Disels are simple, if they have fuel and compression at the right time and in the right quantities they will run fine. You might just have a ...
...318 wasn't running when I bought it, I did some carb work and it ran a little rough so I replaced the plugs and wires and it ran fine I put it in reverse went a few feet then went forward a few feet ...
I got a 1999 dodge ram 1500 318 magnum 4x4 and i wont to know if the engine is worn out take a compression test
...318 eng will run until warm or hot and if you turn off motor. will not crank back up . motor spins just wont crank ...bottom crank pulley eats up belts also------where is the crank ...
...ramcharger 318 misfiring on one cyl replaced dist cap spark plugs wires rotor has 177 compression....still misses one one cly Please go HERE for diagnosis and repair of the many causes of
Question about Chrysler Cordoba
i have a 1982 dodge 350 truck with a 318, it cranks but dont start, it was running fine do you have normal compression, spark, and fuel in the carb ?
my bmw 318 ti wont start anymore it over heated now it wont start do a compression test-make sure its not junk
31 questions posted
Usually answered in minutes!
1 Questions
2 Questions
0 Questions
13 Questions
1 Questions