2005 Audi A4 "lost power engine" Questions

...lost of power audi a4 2.00cc diesel.reg05. when i'm in first gear the car will pull away very slowly (lost of power) and then will kick out alot of gray smoke from the exhaust. only then the engin ...

lost power,has low revs limp mode is when the ECM reduces power in the engine to prevent damage to the engine and gear box. It allows you to get the car to a position of safety to check items like oil

...lost all its power when trying to accelerate. The car has entered into fail safe mode. It wil not allow the engine to rev high but allows you only to get to a mechanic or to get some oil into the ...

lost bottom end power, what dose this meen ? have oxyegen sensors checked.if they fail could have caused catalytic convertor failure,plugging exhaust.a rattle in exhaust when rev engine is a indicator

...lost power but it sounds like a loose valve can anybody give me a nettre idea of what it could be? sounds like your just low on oil. check the level of oil on the dipstick and make sure its within ...

...lost power and when i checked the spark plugs the second coil was loose and brown from engine heat compared to other silver coils and unresponsive even after i changed the spark plugs... any ideas ...

...lost power and shut off. When I started it back up the ESP indicator was on and it started to bog down really bad when at low RPMs. Now sometimes when the RPMs get below 1k it automatically loses ...

...POWER LOST PROBLEM COULD BE FAULTY TURBOCHARGER OR WASTEGATE ALSO CHECK FOR RESTRICTED EXHAUST MUFFLER OR CATALYTIC CONVERTER. At 150k miles replace all fuel injectors,,,,,,,your injectors are beyond ...

...power and finally stop as fuel flow restriction increases due to dirty fuel filter. Get a 2nd opinion from another shop. "Engine management system" means he wants to replace the ECM (electronic ...

...lost power and will shut off what can i do to fix this problem First of all you need to access the Engine Control Module (ECM) using suitable diagnostic equipment connected to the data link connector ...