1999 Suzuki Vitara "tightening tappets" Questions

What are the torque settings to tighten the head on a Suzuki G15A cylinder head and what are the tappet settings ? 3 step torque: 25 Ft-lb, 35 Ft-lb, 50 Ft-lb. Valve lash: Both for intake and exhaust:

how can i make a tappet clearance of honda vtec 98 You will need a "tappet gauge/blade" and then here is what you have to do: 1. open engine head, its the cover of engine where HONDA is written. 2. ...

a 350 small block engine,are bthere a tappet setting because when i tighten them right down,they are opening in every sylender tighten each tappet at each cylinder untill just touching each valve on ...

...sealant: THREE BOND 1217G or equivalent 14. Install the cylinder head cover and tighten the tightening bolts using the following procedures. (1) Temporarily tighten to the following torque in ...

tappets making noise on 4y petrol engine 2.2 Tappets making noise on a 4Y petrol engine 2.2 may be caused by a few different things. Here are a few possible causes and solutions: Lack of oil pressure

...tightening the binding nut onto the rocker arm (tappets are mounted on the rocker arms). Obviously, all of this has to be done with the rocker arm cover(s) removed. That means that before you start, ...

...the outer bolts. When the head is off have it inspected for warpage and skimmed if it is required. Tightening any cylinder head always begins at the middle or centre and works outwards. As my friend ...

adjust tappets Hi, The method of adjusting the tappets is the same on most engines that don't have hydraulic tappets. The gap between rocker arm pad and the top of the valve stem is important for ...

Tappet clearance Hi Neville: Don't know what engine you're working on but if it has hydraulic lifters, we used to set them by backing off the tappet (with the engine running) until it started to click

...oil could be leaking from the tappet cover. May need a new gasket or the tappet cover bolts needs