1999 Suzuki Vitara "intake" Questions

blue smoke on startup when removing intake manifold it was full of oil 2005 XL7 2.7 engineI was going to replace valve seals but found alot of oil in intake You have worn out piston rings. Excessive ...

noisey tappets what is the tappets gap for a 1999 suzuki jimny wide 8 valve engine ,intake cold 0.13 to 0.17mm hot 0.23 to 0.27 exhaust cold 0.16 to 0.20 hot 0..26 to 0.30 mm 16 valve engine (intake ...

...I used a lighter oil. About the time you were writing your message, I replaced the rubber intake pipe feeding the throttle body and I noticed the inside of the intake manifold lined ...

...later, as you study away & try different sites What is name of this sensor po113 Replace the intake air temperature sensor. is this really a USA car, and 2003 ???? he gave english name P0113 ...

...and I will help you. The correct adjustment for the 1.6 DOHC engine is as follows. Engine cold intake valve setting is (0.13-0.17mm) exhaust valve setting is (.23-0.27mm). Engine warmed up the ...

...what are the tappet settings ? 3 step torque: 25 Ft-lb, 35 Ft-lb, 50 Ft-lb. Valve lash: Both for intake and exhaust: 0.15 ...

aperece codigo po113 se apaga al acelerar Hello this is your air intake temperature sensor code my solution replace that sensor.

timming marks diagram for suzuki vitara v6 engine get #1 piston on top dead center and exhaust cam so valves are closed ,get intake valves open

...rpms Could be: Throttle not returning to idle position due to mechanical issue (sticking); Leak in intake manifold due to crack or other issue; Open vacuum port; Failed PCV ...

no power,,but if intake air temp. sensor socket remove,,ok,,but no idle have the fault codes read to determine the faulty sensor /device it could be the air intake sensor or it could be problem HO2S ...