1999 Suzuki Grand Vitara "clutch gear" Questions

...gear you should check the clutch is disengaging properly. Before changing the clutch plate, check that the clutch throw-out is adjusted correctly and the actuating hydraulics/levers have the correct ...

... With the engine running, do the same but keeping the pedal depressed , Does not engage any gear ? -If the clutch fluid is OK , then The bearing of the output shaft is damaged or clutch release ...

is there clutch adjustment difficult to select reverse and stiff and drags selecting forward gears at timesclutch pedal very stiff have to go to floorto change gears sounds like your clutch worn and ...

blush..... clutch pedal stiff shifter lever stiff. grinds , a bad clutch will make the lever seem stiff or will grind, if forced. gears balk? same as stiff. false neutrals. (slips , gear not engaging

clutch or gear box but may not solve the problem ?? Go to a more experienced repair shop, one that specializes in transmissions. Someone that says "maybe this, maybe that, I dunno" really doesn't know

...gear unless I turn the car off put it into first and then go. I can shift speeding up but can only sometimes downshift. It only sometimes goes into reverse. The clutch pedal feels a lot lighter to ...

gear check and bleed the clutch system at the slave cylinder and if that dose not improve the clutch operation then replace the master cylinder. If the system is cable operated then replace the cable.

...gear....is this evidence that the cluch needs changing or the clutch plate??? 58k miles on it, 2002 year of make. Gears are also quite sticky and difficult to change - could this also be a problem as ...

problems with clutch master cylinder on a suzuki grand vitara 2007 after replacing clutch master cylinder was ok for 6 weeks now no clutch pedal again! I too am having problems with my 2006 GV clutch ...