1997 Suzuki X-90 "cost new ball joint installed" Questions

Ad

cost me to fix the inner front track rod end ball joint. mot sheet says it has excessive play 2.2.b. wot the hell does this mean ? can i do this myself? Never saw a baleno, and have no idea what a mot

Ad

...new ball joint. NOTE Make sure the new ball joint snap ring is fully seated. 2. Always install new: Snap rings. Castellated nuts. Cotter pins. Upper ball joint nuts. 3. Observe the following torques: ...

Ad

...cost that this involves. I can replace the ball joints myself but I know that you need special tools to replace the bushings. Would I still need to try to get this tool since the new upper control ...

Question about Suzuki X-90

1 Answer

...new one anyway (take it loose from the tranny before hitting it). Tools you will need are the big socket for the axle nut (around 22mm or so) and regular metric socket set, preferably 1/2 in drive. ...

...ball joints are still good. also i just put on brand new shocks and steering stabilizer, Anything from improper wheel torque, combined play in several otherwise "good" linkage components or bushings ...

cost effective to simply replace the entire shaft assembly including the two CV joints and boots. 6 Install the new shaft and CV joint assembly. Clean the transmission seal that came off the old unit;

...cost to fix front left ball joints A dealer can charge between $75.00 to $99.00 per hour for labor, the job consists of about 2 hrs labor. You also must consider the the car's alignment must be done ...

...new bearing in the steering knuckle. It'll cost about $100. Now you'll have the axle, steering knuckle with new bearing and hub installed, and the brake rotor. Take these parts home and put the car ...

Question about Suzuki X-90

2 Answers

...COST MUCH MORE AND WIL WORK WITH A WARRANTY.TAKE OFF WHEEL,LOOSEN AXLE NUT,TAKE OFF LOWER BALL JOINT,POP AXLE WITH HAMMER TO DRIVE AVLE OUT OF BEARING A LITTLE WAYS THEN PUILL UP ON STRUT ASSEMBLY TO ...

Question about Suzuki X-90

3 Answers

...factory bolts in, and then I just installed the new support arms using the factory ball joints. Viola. the best Hood or Hatch supports can be found at www.partsavenue.us use discount code Coupon ...

Not finding what you are looking for?
1997 Suzuki X-90 Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...