2000 Subaru Legacy "mass air flow sensor" Questions

Ad

Question about Subaru Legacy

1 Answer

...mass air flow sensor which I replaced two days ago. I took the car to a shop and had it looked at by a tech and it said the mass air flow sensor was receiving "high input". I have come to the ...

Ad

Question about Subaru Legacy

1 Answer

...Mass Air Flow High (MAF) sensor or circuit. A more technical description would be that the MAF circuit had higher than expected voltage (air flow). The simplest thing to do is to reset the code and ...

Ad

...Mass air flow sensor or fuel pump or both, they will run $300.00 for the pump, fuel sock and filter mass air flow sensor runs about $300.00 as well. But if it is doing what you say the catilitic ...

Question about Subaru Legacy

1 Answer

...Mass Air flow senser in the history.i changed plugs and now i bought new ones(different brand) so that i try to resolve the problem since they could be a problem I had this problem once, and it was ...

Question about Subaru Legacy

1 Answer

...Air Flow Meter or sometimes reffered to as a Mass Airflow Sensor. Eventually, as the AFM deteriates further you will no longer be able to start the engine as the ECU can no longer get accurate flow ...

Question about Subaru Legacy

1 Answer

...and I just had the Mass Air Flow sensor replaced. At highway speeds it's OK, but when I slow to a stop the same 20-30 mph problem occurs. What to do? Speed sensor may be giving a false reading

Question about Subaru Legacy

1 Answer

Mass Air Flow Sensor. Find it, and it can be cleaned with crc electrical cleaner. It's in the ducting between the air filter and top of engine. Do not touch or clean with any other than the crc spray.

Question about Subaru Legacy

1 Answer

...mass air flow sensor. The computer sends a code for a cylinder 1 misfire. About three weeks ago it first sent a code for an O2 sensor.I'm not sure if I should replace the plugs and wires first or the ...

...to start , and when it finaly starts no power, rough idle , no acceleration. I belive your car is OBD I , so you can try to disconnect air mass sensor while it's running , and see if it's any

...board that is supposed to be left disconnected (green) if you connect then it forces it into diag mode..... Hi, mine did the same thing, it was the mass air flow sensor. I also changed the

Not finding what you are looking for?
2000 Subaru Legacy Logo

163 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...