1998 Plymouth Voyager "need key" Questions

...key into the ignition it wont turn (seems stuck). wondering what i need to do to solve this problem Hello, you'll need a new ignition switch. You much have a lot of stuff hand off your key chain, ...

...to release. If the key will not turn than the retainer button will need to be drilled out to remove the lock cylinder. This problem is pretty common in 99 and older Chrysler products across the

...key and turn. You might need to call a locksmith. When the locksmith makes you a key, keep this as the emergency backup (kept at a safe place at home) and use the copy made from this backup as your ...

...turn over ....won't come out what do you suggest? You need to find a way to replace the lock cylinder. Will the key tap in all the way to turn it? That would make it easier to get the cylinder

..., lubricate lock with wd-40 or silicon spray, sticky inside? another choice is try different key as old one is worn and not disengaging all the tumblers, all fails you need new ignition

turnning, try these things first and if you still have a problem then i would say the ignition lock needs replacing good luck

need to get a new switch? I have not had any other problem with the van..................Thanks! Your problem is caused by the little pins that the key moves to unlock the cylinder, they are sticking,

...is low. I had a Chevy Impala that when the battery was low you could not get the key out of the ignition. Hooked up jumpers and it was fine. The newer cars need a really good battery all the

or diesel ??,,factory immobiliser ???could very well be ,only need to leave key in pocket with a mobile phone and its a non starter .shouldnt cost more than 200? to reset the key ,tried the spare key?

...voyager se wont start when keys is turnsd Has power but key turning does nothing clean battery connections, switch starter relay with horn relay. if still nothing starter is cooked. need a new