1997 Plymouth Breeze "replace transmission" Questions

...transmission. Make sure you replace them with an exact replacement are they are not interchangeable. Hope this helps. check the neutral switch located on top or side of the transmission body if they ...

...taking it to get serviced and found out it was the front seal of the transmission and it had to be replaced. So we had it replaced and they had to take the engine and transmission out. Now about 3 ...

...replace the front seal If it is an AUTOMATIC, you must remove a lot of parts. For front wheel drive the first thing are the wheels. Then drop the lower ball joints,break loose the struts from the ...

Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the

...now it wont kick in. Also it will not change where the air blows out(bi level, floor, etc.) I replaced the module in the car for the heater controls to no avail. If I put 12 v to the wire going ...

I am trying to find out how to remove the front axle3 on my 1996 plymouth breeze to replace the transmission strut ,lower ball joint, tie rod Brake Caliper, and all on trans side Must come off

check engine light code p1782 Hi, the code P1782 means that 2-4 pressure switch sense circuit FAILURE. It basically means that the transmission solenoid pack needs to be replaced.

...wheel and transmission if the boots are torn or you can move the axle shaft around they need to be replaced, Let me know if you need replacemint ...

...replace driver side cv half shaft? Hi and thanks for using FixYa. It is not necessary to drain the fluid prior to removing the axle, but you will lose fluid once you begin to remove the axle from the ...

...replace the filter, you will have to take off transmission pan to change the filter. another way you can take to shop and they will flush and clean the transmission with compress machine without ...