2001 Mercury Grand Marquis "replace blend door motor" Questions

...blend door not working does not seem to have power to motor removed blend door motor replaced with new motor before installing motor plugged motor into harness to test changed temp new motor does not ...

replace the blend door motor, unless the blend door itself is broken then theres a replacement door or box that need to be installed, this is a big job, the dash needs to be removed to do this job and

...Blend Door Actuator may be stuck or it is inoperative. The actuator is not fixable, if it fails, it must be replaced. Follow the instructions to remove and replace it. Disconnect battery negative ...

...so i have heat sorry but it can not be done, you will need to replace the blend door motor, it is in the top of the air handler box, you will have to remove the dash to get to the motor....good ...

blend door actuator motor, very likely this motor has failed or the bend door is stuck due to warping (it is a light weight plastic), the bad news here is that the entire dash assembly must be removed

...blend door / actuator without spending all day taking apart the dash? Look at the motorcraft site & get to the parts area Use your VIN # then your got exactly your vehicle Enlarge the view of all ...

...replace blend door motor. I found a site that said i had to remove dash. I think if i can get the passinger airbag out, including it's cover i can get to it from there. how do i remove airbag and ...

Is replacing a blend door motor on a 1999 Mercury Grand Marquis a DIY job? Almost book time is 6.3 hours due to the dash has to come out.

...blow hot air in cold weather when i start A/C in cold weather ,no hot air come this problem is caused by a defective air temp control blend door motor, to replace this part the dash must be

...switch on my 2006 grand marquis is not working how do you fix It is a blend door motor and it is around $40 for the Part and the Labor to remove the dashboard to replace it is very high! Shop