2001 Mercury Grand Marquis "high" Questions

Ad

Question about Mercury Grand Marquis

1 Answer

When I turn on my highbeams, the lowbeams shut off. Is this normal? Yes, the low beams will shut off if you turn on high beam. Not sure which way yours work but if you push the lever for high beam, ...

Ad

Question about Mercury Grand Marquis

2 Answers

...still not working Two possiblities. The freon charge levels will need to known on both the low and high side. with a good unit running the low side with the engine reved up should not be less than

Ad

Question about Mercury Grand Marquis

2 Answers

Still no High Beams on my car, Checked fuse they were fine, High Beam switch is fine, all lights and blinkers work well too, I'm stumped! check your headlight control module behind the LH side of the ...

Question about Mercury Grand Marquis

2 Answers

Car A/C only works when i turn the little wheel knob thing on high. its either off or on high. Why??? There is a resistor between the controls and the fan motor that controls the speed. When that ...

Question about Mercury Grand Marquis

1 Answer

Check engine code reading ''Map Board Sensor, High Input'' and a second engine code ''EGR Sensor, High Input'' Light just came on. Vehicle is a 2005 Mercury Gran Marquis with 85,000 miles on 4.6L V-8.

...pump, and #4 which provides power for the fuel pump relay.  Both of these fuses are in the High Current fuse panel, which is located in the engine compartment near the battery.  The ...

Question about Mercury Grand Marquis

1 Answer

how do I adjust headlight beam on 2002 grand Marquis Mercury and what tools are needed a screwdriver or a socket The adjustment screws/nuts should be located either on the top of the headlamp assembly

Question about Mercury Grand Marquis

1 Answer

2007 blower motor speed control for a Mercury Marquis. I only have high,is their is something besides climate control (act unit)., dash climate control is all low ampereage, and blower is high amps 30

Question about Mercury Grand Marquis

1 Answer

...door besides my driver door my emergency flashers start flashing usually last about 3 mins and my high beams don't work but my bulbs aren't blown and the fuse is good.....What should I do High beam ...

need location of high pressure cutoff switch 97 mercury is high pressure switch .on compressor or high pressure line? The P/S is located to the rear of the compressor, it has a 4 pin round connector.

Not finding what you are looking for?
2001 Mercury Grand Marquis Logo

747 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...