1999 Jeep Cherokee "radio face clip" Questions

Ad

...Depending on the radio, you may also need an adapter face plate to mount it. Follow the wiring diagram for the harness that came with the radio. If factory, just plug it in and put it back

Ad

...face is held on solely by clips (there may be 1 Philips head in the cubby)... start at the bottom (gently tugging) and work your way to the top. The radio is held in by 2 (10mm screws). If your using ...

Ad

Question about Jeep Cherokee

1 Answer

...radio face there are two holes in the radio face face that a special relase tool set go through to relase the spring clips, you apply a slight outward pressure on the tools while pulling the radio ...

Question about Jeep Cherokee

1 Answer

...face of the radio,you will see a small hole in each corner,if you will take two large paper clips,bend them to where they are in a U shape,insert one clip on the left side of the face plate and the ...

Question about Jeep Cherokee

1 Answer

...screws on top and sides of radio. Remove knobs and outer bezels around knobs. Face has retainer clips top and bottom. Unsnap the face of radio and remove old bulbs there are five or six in a gm

Question about Jeep Cherokee

1 Answer

...radio face plate and release the radio retaining clips. Pull outward on Radio Removing Tool to remove the radio chassis from the instrument panel. Special Tool(s) Radio Removing Tool 415-001 ...

Question about Jeep Cherokee

1 Answer

...tool set, very cheap to buy, the tools go throught the little holes (2 on each side of the radio face plate) on the face of the radio and release the spring clips that hold the radio into the

...about replacing it? remove cup holder remove two philips screws and pull face plate off remove two 10 mm (wrenchsize) screws from radio pull radio out and unpluge wires (face pulls off it has clips

...radio is in very solidly. Have tried to remove the plastic trim but it does not clip out as I would have expected. If the unit has 4 small holes on the face, get a wire hanger and insert into all 4 ...

...face plate is the plug for the rear defroster. Also, there are clips that hold the face plate in place. They just push in and out. Once the face plate is off, you can get to the radio mounting

Not finding what you are looking for?
1999 Jeep Cherokee Logo

1,547 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...