1999 Jeep Cherokee "distributor" Questions

I replaced the timing chain all the timing marks are aligned but the engine wont start , the distributor rotor lands between the 4th and 5th post. If timing marks are on , distributor is out . Bring ...

Distributor Gear damaged and car won't start I recently had a new distributor installed only to fail a short time later. When it was installed a distributor mounting gasket was not used. Could this ...

degreased and hosed moter down now wont start,petrol 4.0l Water in the distrubutor cap. Dry out the distributor. Take you Distributor Cap off and spray it out with DW-30 or some other kind of moisture

...NOTE: To avoid confusion, tag and remove the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed ...

.1989 Jeep Cherokee rough running problems. I have a 1989 Jeep and had the distributor replaced by a local shop. Unfortunately, since that time, I have had rough running at lower speeds, 10 to 40 MPH.

...sensor is can u help trying to find a photo of it to help out the sensor is actually inside the distributor,its a hall effects sensor,easily replaced..just remove the dist. cap and the dist.

I have a '96 jeep Cherokee and I have a code po1391. I had broken the forks off the distributor for the hold down bolt so I had it welded. This is when this code appeared. According to my Haynes ...

...it gas it back fires. i have replaced the timming chain and gear.i have checked the timming on the distributor and i still have a problem with the back firing. Sounds like distributor is exactly off ...

...driving acted as if it was out of gas Hello! The Camshaft Positioning Sensor (located inside the distributor) is the culprit...The CPS can not be purchased by itself and comes only as part of the ...

...you can try to turn the crank with a breaker bar. While you do this you should have the distributor cap off.  Then watch the rotor inside the distributor turn.  It should be ...