1995 Jeep Cherokee "used power steering pump" Questions

...power steering. Can anyone help? Thanks...Bill To replace belt, first loosen the pivot and slide bolt on the steering pump, then use the jack bolt below the pump to move it. Belt goes (ccw) around ...

...power steering pump to it's bracket and use the transverse bolt under the pump to loosen it. If there is no diagram of the belt routing on the radiator support, draw one then remove and replace the ...

...can't find the tensioner pulley is because you do not have one...The power steering pump is used to tension the belt. loosen it up and slide it. (some have an adjustment screw underneath to

power steering pulley, going ccw, under the top idler (back of belt on pulley), over the ac compressor, over the alternator, up over the fan (backside of belt on pulley), around the crank pulley, over

...power steering pulley... you will find a nut there, LOOSEN IT ONLY! look at the back of the pump and LOOSEN the two bolts on the back. Then finally, on the side of the pump at the bottom of the ...

power steering pump. I decided to go with a rebuilt pump from Autozone. I took in the bad one and they showed me the bearings where gone. They replaced the pulley on the new pump for me I bought a new

...power steering is missing do not spray any lubricant or cleaner on belts. they are rubber made.you can use a dry soap if you can remove belt.on 4.0 engines it can be tightened a bit. there is a bolt ...

...power steering pump assembly. loosen the top bolt on the PS bracket, the 2 bolts on the back of it, and the bolt holding the adjustment bolt tight (the long bolt threaded into the bracket under the ...

what duse the power staring pump do... What duse the power staring pump do it pumps fluid to make the steering easier to steer with out it it would be difficult to use with out it, but not imposable

...power steering pump you will see an idler pulley. Loosen the center bolt and also loosen the visible transverse bolt that goes to it. loosening that will allow the pulley to slide so you can either ...