1995 Jeep Cherokee "fuel hand moving down" Questions

...hand fell down past empty and wont move. Any ideas? got spark? test fuel work? run for 3 seconds, sprayed into intake ports. ?????? if yes, it runs on test fuel and stalls then find out why you dont ...

...hand goes up and down FUEL GAUGE GOING UP AND DOWN SOME TIMES FUEL MOVES AROUND IN FUEL CAUSE FUEL GAUGE TO GO UP AND DOWN.I HAVE SEEN FUEL LEVEL SENDING UNIT HAS POOR GROUND OR SHORTING OUT.A BAD ...

fuel gauge always shows full. I removed the instrument cluster and moved gauge down by hand. The needle moved back to full when the key was switched to acc position. I did not find any loose wiring or

hand pump until you see fuel moving through the tubing. Continue to pump the hand pump until all of the fuel is drained and you can no longer see fuel moving through the tubing. This may take a bit of

...fuel automatic(device)i dont know the exact name.he moves it manually by hand up and down the needle also moved with it.is it the problem of guage of fuel automatic(device)? If you remove the sending ...

...fuel tank straps and letting the tank down a bit. Dont have to completely remove the tank, but you do have to move it. John might know more than me, but if it's similar to the Quattro filter, it ...

...fuel mix are not working correctly within the computer.If not your gas gauge is not working. Trucks are gas guzzlers any way especially v8s and also seeing the gas hand move is actually ...

...fuel? After it sat that long I may have pulled the plugs and tried the crankshaft by hand, plus add few drops of oil in each cylinder, before cranking. I saw what you replaced, what testing have you ...

...fuel automatic(device)i dont know the exact name.he moves it manually by hand up and down the needle also moved with it.is it the problem of guage of fuel automatic(device)? sounds like fuel level ...

...hand off ground?) my guess , you meant it seems. like??? 1: lost engine power? 2: transmission not up shifting? is this a auto A/T or manual M/T tranny, if A/T , you need to look at the engine RPM ...