...flex plate of your transmission. Even if you found a way to remove it, it would be really difficult to replace it correctly. If you are going to replace it due to a bearing failure, keep in mind that ...
set it aside, then you unbolt the flex plate from the crankshaft. Bolt the new flex plate onto the crankshaft, bolt the torque converter to the new flex plate, and put the engine back into the vehicle
Question about Nissan Cars & Trucks
...flex plate and torque converter on a 2006 nissan altima 2.5 automatic transmission If the transmission is out of the car, the flex plate is bolted to the engine's crankshaft and torqued/locked as ...
flex plate on 96 Buick skylark remove the transmission first ( keep the torque converter with the transmission as a unit ) use an impact gun , remove the crankshaft bolts for the flex plate making you
...flex plate and line up bolts I have installed 5 trannys in my 2000 2.5 ranger and the pump will not work. Surely I'm doiing something wrong It should be pretty basic, install the flex plate to the ...
Question about Chrysler Cars & Trucks
...flex plate (flywheel) is Cracked, Usually around crankshaft flange. You can check the bolts without removing the engine, but the flex plate will require engine removal. Look in inspection opening ...
...flex plate. The flex plate is bolted onto the end of the crankshaft and is between the engine and transmission. It connects the crankshaft to the torque converter of the transmission. It also has a ...
Question about Cars & Trucks
...Bolt 101 75 - Connecting Rod Cap-Bolts 54 +1/4 turn 40 +1/4 turn - Crankshaft Main Bearing Cap/Bedplate - M8 Bolts 34 250 - M11 Bolts 41 +1/4 Turn 30 +1/4 Turn - Crankshaft Damper 136 100 - Cylinder ...
Question about Jeep Cherokee
...Bolt 54 40 - Cylinder Block Drain Plugs 20 15 - Cylinder Head-Bolts (Refer to 9 - ENGINE/CYLINDER HEAD - INSTALLATION) Cylinder Head Cover-Bolts 12 - 105 Flex Plate to Crankshaft 88 65 - Engine ...
...flex plate from the crankshaft. Remove the 2 bolts (3) and the sensor wire harness clips or shield. Remove the bolt (4) securing the CKP sensor to the engine block (5). Remove the CKP sensor (1) and ...
876 questions posted
Usually answered in minutes!
1,380 Questions
1,162 Questions
672 Questions
659 Questions
325 Questions