1988 Jeep Grand Wagoneer "directions play tower" Questions

...play in the ball socket. It rocks one way on a left turn and another on a right turn. You did not indicate a 2 wheel drive or 4x4. Some of the strut towers have bearings on top. You should also check ...

have 1988 tbi chevy 350 pulled the distributor out only to find out the marks are gone, now what? Retime it. Put #1 cylinder at TDC of compression stroke. Pull number one spark plug: with finger over ...

how do i set the distributor that runs counter clockwise No different than setting one that turns clockwise. You set it in so the rotor on the distributor shaft lines up with the number 1 cylinder ...

...play or movement in any direction. any ideas? look at the rubber grommets and end rubber on the stabilizer bar .. also check the top of the strut tower (under hood). they sometimes rust out allowing ...

...tower bearings and even the rack and pinion can develop play in their bushings. Many times these parts need to be inspected by sight and/or touch. This kind of inspection is what you get in ...

Gm carb 305 timing problem i installed a used gm 305 into my truck, replacing a old 305. The truck will only run withthe timing very advanced (maybe 20 degrees) and doesn't have much power and bogs ...

...tower too. Age shrinks these parts, so look there too. Bearings don't make a clunking type noise, more of a grinding noise. To check a bearing. jack up one side till the tire turns freely. Grab the ...

...tower bolts (14mm allen x 3) by removing the Airbag and glove box assemblies... there's barely enough room to get to those bolts. the deepest nut is going to be really hard to get out, but prevailed ...

i am replacing my rack and pinion in 1996 dodge intrepid.do i need to replace my inner tie rod ends as well? Power Steering Rack -I don't think you need to replace the inner tie rod ends as well ...