1988 Jeep Comanche "turn signals" Questions

how do you change turn signal bulb on an 88 comanche. cant figure out how to get too it. which turn signal the front or back if its the back try looking fdor a apartment and stick your hand back ...

...turn signals on my 1988 Jeep Comanche dont work. I replaced the flasher, and the turn signal switch. The bulbs are also good. The hazards work perfect. When i pull the nob to turn on the lights the ...

...lights work but when you put the brake on, the front right turn signal goes on. After I changed the headlight switch now the turn signals don't work. HELP???!!! try making sure all the grounds are ...

turn signals do not work 1989 Jeep Comanche truck turn signals do not work and fuses are not blown. Both arrow lights come on green when headlights are on. No noise that it is blinking. This is one ...

87 Jeep Comanche, turn signal issues 87 Jeep Comanche, turn signal lights up brightly, but won't pulse. Hazard lights, however, seem to work correctly. You will find that there are two flasher units ...

...tail signal light work perfectly, but the right tail signal light does not work properly, when i turn the right signal on the both of the tail light turn on. when the right is on the left blinks ...

...and I am not sure how to put back together properly. Hope you can help. If it is the old fassion turn signal switch,then the flat part fits into the rectangled slot on the turn signal switch.This ...

...turn signals.Check the bulbs(all of them)in the rear tail light assembleys.If you can not tell which bulbs are bad,replace them all.Does this vehicle have a trailer light plug?If it does,it could be ...

...turn signals It should either be under the dash on either side of the steering column or it may be a "combination module" which is both in one unit, usually on the right side of the column. seen this ...

when i put my signal ligths on they dont flash but they turn on my signal ligths turn on,but don't flash at all. Your flasher is faulty!