...wd40 and remove inside tailgate pannel make sure linkage is connected and spray lots of wd40 manually lock with a screwdriver and lift handle you may have to adjust liftgate in or out on that
...liftgate lock cylinder wave washer and adjust lock rod. DO NOT replace the liftgate latch or actuator. Condition Some customers may comment on one or more of the following conditions: • The rear ...
...liftgate lock cylinder wave washer and adjust lock rod. DO NOT replace the liftgate latch or actuator. Condition Some customers may comment on one or more of the following conditions: • The rear ...
Question about GMC Cars & Trucks
...liftgate lock relay control circuit and will set DTC B3825 as current and also send a Class 2 message to the DIC. The DIC will display REPLACE LIFTGATE FUSE to inform the driver that a fault has been ...
...lock the liftgate, press the lock button on the RKE transmitter or use the power door lock switch. The liftgate does not have a key lock cylinder. To open the liftgate, pull up on the handle located ...
...liftgate lock cylinder (if equipped) liftgate window glass liftgate window latch/ajar switch liftgate window glass release handle liftgate latch remote control which consists of the following ...
...liftgate lock cylinder (if equipped) liftgate window glass liftgate window latch/ajar switch liftgate window glass release handle liftgate latch remote control which consists of the following ...
by operating either one of the front door lock switches, or by pressing the Lock/Unlock button on the key fob. The endgate/liftgate lock and unlock functions operate in conjunction with the rear doors
...liftgate lock relay supply and coil sides receive a constant voltage through the battery voltage supply circuit and the ECC fuse. The normally closed contact is connected to ground and the control ...
138 questions posted
Usually answered in minutes!
29 Questions
23 Questions
6 Questions
95 Questions
78 Questions