1987 Jeep Cherokee "lift" Questions

Replace rear hatch hydraulics on a 1999 Jeep Cherokee if u look at where the lifts attach to the ball socket u will see a half round spring clip, remove the clip with a small pocket screwdriver to ...

...size I am wanting to put 36 x 12.5 x15 on my 94 jeep country do you think i could get by with a 6" lift or would i need to go higher? i no you can put 30 inch on no body lift its should fit 6 more ...

i put a 4.5" lift on my 88 cherokee and my tranny i put a 4.5" lift on my 88 cherokee and my tranny linkage is binding up. any help will be good. its a 5 speed stick the best bet is to get an ...

shock size ok so i go to the auto parts store and tell them i need shocks. tey ask if its a 0 inch lift, 1 , 2 , 3, upcounty ect ect. i got this car used im 95% sure its stock suspension. i have a 98 ...

Anyone having trouble trying to change the shocks on the rear lift gate on 1994-1996 Jeep Cherokee Sport? Answer- On the top they just snap out. A little force works fine.Bottom usually not a problem.

Rear dome light Is the lifting of the tailgate supposed to turn on the rear or any interior lights? I can't seem to find a "sensor" button like the passenger doors have nor can I find a mention of a ...

...open my trunk, but the two hydraulic looking bars on either side of the trunk/gate won't lift the rear door up all the way. I have to pull it and then push it up manually, and use a 2X4 to ...

how to shut off security system ock all your doors. go to the back lift gate and turn the key. sometimes the lock in the lift gate gets stuck and sets off the security system, exspecially after the ...

1987 Jeep Cherokee -Rear lift gate will not open when key is turned and button is pressed in. The rear latch will not release. Has anyone seen a problem like this and if so, what is the solution? I ...

...u-joints on the drive shafts : 3rd members on the front and rear axles If you can get your car on a lift, a mechanic can put the car in gear while it's on the lift and isolate where this is coming ...