1986 Jeep Grand eer "reverse 1996 cherokee" Questions

...1996 Jeep Grand Cherokee stalls all of the time. I googled around to see possible causes and one that kept coming up is then eed to clean or replace the IAC valve. Where is the IAC valve located? ...

...REVERSE ON MY 1996 CHEROKEE AUTOMATIC TRANSMISSION, IT IS NOT THE FUSE The neutral safety switch can be adjusted to make this work. (loosen it and turn , then lock it down. This changes neutral start ...

1996 jeep Grand Cherokee - No Reverse I dropped the pan and replaced the two sensors because none of my gears were engaging. Every gear works fine except for reverse. Could one of the new sensors be ...

...1996 says "rear lamp failure" but my lights still work, what does this mean? Make sure you look really close at the bulbs. There can be side markers, license bulbs, reverse lights, and third brake ...

...1996 Jeep Cherokee and the back up lights and license plate light has quit working. Any sugggestions? We have lost the manual for the fuse panel. Reverse lights are activated by a small switch on the ...

1996 jeep grand cherokee wont shift into 3rd gear I just replaced the automatic transmission I adjusted the linkage checked the fluid level Did I get a bad trany or could it be something else it has a

...reverse when the 1996 Grand Cherokee 4x4 AT is placed in reverse it will not engage for quite sometime......it eventually will move some, but still does not operate normally.....can this be repaired ...

...1996, reversing lights not working Bulbs ok, does anyone know where the switch is that engages the reversing lights ? Screwed into the transmission, on top or on one side. Should have only one or two ...

...top nut first. Remove the bottom 1/2 inch nuts and bolts (2). Install in reverse order. 1996 cheep cherokee front whells start slipping and vibrating when off road climbing small incline. just ...

...Cherokee wont go into reverse My car will shift in to Drive and Neural and move forward when I push the gas peddle. When I put it in reverse, it will not move when I push the gas peddle. It seems to ...