1998 Isuzu Rodeo "remove swicth" Questions

all my lights work except my brake lights. all my fuses are fine the brake light swicth is at the top of brake pedal remove wires from swicth and brigde together if lights work replace swicth

...headlight swicth? remove the top and bottom steering wheel column covers then push on lock tabs at top and bottom of switch assembly while then slidding out PULL then disconect wiring from

...remove the heater switch from the dash before you replace the swicth check the blower resistor its right behind the blower motor use a 12 volt test light hooked up to ground un hook resistor and test ...

...remove fuse to stop it, the swicth is bad in dash were the swicth goses off and 1 though 4 or 5 the blower motor resistor relay assembly may be bad, it is located on the blower motor housing front ...

swicth on a 2002 jaguar how do you remove the old one To remove the switch first remove the coin ray below it then put your finger on the top of the switch from behind and press theplastic at the same

...one has one thats simple! use a tox screw driver to remove the airbag squib! the remove the steering wheel nut,then remove the steering! tap it to come out! then voila! have your turn sig swicth

removed key switch and key replaced swicth still won;t start . key only moves forward will not move to off I giggled the transmission shifter in park... heard a relay click then was able to remove key

...signal switch (combination switch) does not stay in place for right turn singal. hi,first remove the neg. battery cable,remove air bag with care,then remove steering wheel,combi..swicth can ...

remove, disconnect yellow connector remove clock spring ***. turn signal assembly, head light swicth.. etc... last nut 17mm or 18mm. remove .. you will need a steering wheel puller for the next step..

...swicth assemble,remove the steering column cover by a metal screw then remove the cover and remove the screw from the cylinder barrel remove the ignition swicth assemble then replace with a new ...