1995 Isuzu Rodeo "read 134a gauges" Questions

...read high and low side pressure readings. Avoid adding refrigerant with a simple charging kit like the ones sold at parts stores. Don?t add any stop leak, this can cause problems in the compressor, ...

...35 psi and 40 psi on a newer system using R-134a refrigerant. The high-pressure gauge will read between 150 psi and 250 psi on the R-12 systems, or between 250 psi and 350 psi on the R-134a

...134a with the gauges on them if you read the can or the gauge it shows you when it is full. Make sure you connect to the Low side of connection. there should be a decal under the hood. 1.5 lbs, or 25 ...

NUMBER OF POUNDS ON GAUGE FOR ADDING FREON LOW SIDE HAVE TO ADD FREON 134A NEED LOW SIDE POUNDS ON GAUGE it should reads from the manifold gauge on low side 38psi and 180 high side.

134a,when I hooked up the the pressure gauge it registered 75 PSI on the low side so I did not add freon. what would cause the pressure to read in the warning area of the gauge? and how to fix it. The

...2005 in the air condition sevice? Do you have a pressure gauge, if so put freon in till the gauge reads ok, remember to have your AC on full when

134a to my 1998 jeep cherokee sport and the gauge read full. Air is still blowing warm. What do I try next?` 40 is way to high, should be around 28 psi when the compressor shuts off and 34 psi when it

...134a to the low side port and got a reading of 140psi on the gauge while the ac was running. This was way in the red. What should I do? Have a mechanic check it with his ac gauges,if this is so,then ...

a/c light flashing 2007 eclipse Mine does the same. And I keep getting in accurate readings from the high side. As soon as I hook up the gauge it reads low r-134a, but when I open the valve allowing ...

Air conditioner blows luke warm air . On the low side the gauge reads danger,when I was going to add R-134a refrigerant system may be over charged/compressor or control valve failure