1995 Isuzu Rodeo "95 cranks spark" Questions

...95 isuzu rodeo that has no spark at the motor it trys to crank over and you can smell that its getting gas it ran perfect then he shut it off and went to start it 4 hours later and i wouldnt Which ...

...95 rodeo. not the Diesel right>? gasoline engine, the diesel has a timed pump....
GAS:
what engine? car has 2 or more as options... and fuel systems vary by ,(drum roll) engines.
my guess is ...

...95 v6 nissan maxima cranks but wont start i check the sparplug cable for spark and ther is no spark. i also change the crank senser but wont start please help I had a 94 which i fixed this same type ...

95-97s had an additional crank sensor. .... 1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others) 2jzge position sensor?? Nov 2, 2011 SC400 Crank Shaft Position Sensor. WHERE????? Oct 11, 2011 SC300

...95 motor 5e 16valve no start the car not have spark please help me for this problem . thanks best regards If not cranks at all check the battery for charge, starter, fuses If cranks no start check ...

95 civic no spark I have 95 civic that just died when i was driving.Wont start it has no spark. Does it sound different when you crank it over? if so remove the oil filler cap and look inside while ...

cranks won't start 95 Honda accord 2.2 manual transmission. died while driving, cranks but won't start. good battery, starter First you must check to see if engine is mechanical sound by performing a ...

...spark,crank sensor? 95 dodge ram 5.2 l no spark,new coil still no spark,crank sensor? Could possibly be the ECM or computer it may be the crank sensor. The crank sensor is probably the cheepest so I ...

...cranks it over. If you have NO spark and NO injector click - crank sensor needs to be replaced. 95% other 5% hmmm wiring problem on / near crank or cam sensors, theft system active, dead pcm....... ...

...95 nissan altima cranks with fuel but no spark at the coil wire that leads to the distributer cap. so no spark at any plugs or distributer. co po340 and code325. PO345 is the cam shaft positioning ...