1991 Isuzu Rodeo "clutch slave cylinder" Questions

Ad

...clutch slave cylinder is the cause of vehicle non performance? My truck clutch just quit working, after I felt like the linkage to the clutch came loose, confirm if you have fluid leak from master or ...

Ad

...clutch slave cylinder at the transmission by a metal line. If the slave cylinder is leaking (most common) replace it usually --two bolts and a metal line fitting. the clutch system will have the air ...

Ad

...slave cylinder and clutch arm. Loose or broken slave cylinder mounting. Missing pin or broken part between pedal and master cylinder. If mechanical linkage, look for broken components or missing pins ...

...clutch slave cylinder- leaking clutch fluid. most of the time both are replaced at the same time which should be recomended by your mechanic, the bolts to the master cylinder are very hard to get to ...

...actuating rod at the slave cylinder back and forth in and out of the slave cylinder,,this should recharge the clutch system. then try bleeding again but make sure you do not allow air into the

...clutch slave cylinder is leaking inside of the bell housing. When this happens you do not get the proper travel of the slave for the clutch to release. That is why the gears grind. If it is leaking, ...

Question about Isuzu Rodeo

2 Answers

...clutch master slave cylinder with no luck. After the car had sat for a couple day's I noticed a leak coming from the slave cylinder. I replaced the slave cylinder & bleed the air from the line, ...

clutch master cylinder or the slave cylinder. The cause could be external or internal. First check the fluid level in the reservoir. The reservoir could be independent of the brake system or using the

...clutch slave cylinder. It will be bolted to the clutch housing. Locate the small bleeder screw near where the hydraulic hose connects to the slave cylinder. Step 4 Connect a length of clear plastic ...

Question about Isuzu Rodeo

1 Answer

...clutch will not engage. I know the slave is leaking. A leaking slave cylinder should cause the exact opposite problem. A clutch that will not disengage. Either you chutch is shot, or depending on the ...

Not finding what you are looking for?
1991 Isuzu Rodeo Logo

236 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Isuzu Rodeo
2001 Isuzu Rodeo

832 Questions

1999 Isuzu Rodeo
1999 Isuzu Rodeo

814 Questions

2000 Isuzu Rodeo
2000 Isuzu Rodeo

819 Questions

1998 Isuzu Rodeo
1998 Isuzu Rodeo

720 Questions

1995 Isuzu Rodeo
1995 Isuzu Rodeo

623 Questions

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...