1986 Isuzu Trooper "crank" Questions

...strap. This happened to a friend of mine. Worth a look. Put a 1/2 in drive socket that fits the crankshaft pulley bolt on a breaker bar an try to turn over the engine , does it turn ? Did you ...

...oper. Temp. I have done the normal tune up. But nothing is helping the problem of my Trooper. It cranks and runs great until it reaches a normal oper. Temp. It will the loose all power and die. ...

1992 ISUZU TROOPER Crank Sensor location Where is the crank sensor located on the 1992 Isuzu Trooper? doesnt have one its inside the distributor where is 2001 isuzu trooper crank sensor location

where is located crank sensor izuzu trooper motor 3.5 where is crank sensor located look through right wheel arch and lift up rubber flap next to engine mount bracket is crank sensor

wont crank up when turning ignition key There could be several solutions for this problem. Check that your battery has a proper level of charge. You can start diagnosis by ensuring that the vehicle ...

No start but cranks, where should I check has fuel and compression, no spark? getting fuel and has good compression no spark from plugs. Could all coil overs be bad? Could it be bad crank sensor or ...

1991 trooper wont start. getn fire and fuel, could it be crank sensor? Yes it could be the crank sensor.  First go to Autozone and have the car scanned for codes (free) that should indicate if ...

how to remove crank shaft pulley without air tools thanks!!! with fan and fan shroud removed use socket and long breaker bar (can use pipe on over breaker bar for extra length) put on and jam bar onto

what is crank position sensor on Isuzu trooper 2002 3tdi What is? It tells the ECU what position the crank is in to control timing. one more easter egg hunt. CKP finder. what does, what is mean? did ...

...(the pump has 2 wires, measure across those) back probe that connector to the pump. 2 pins. 12vdc cranked, if you have 12vdc cranked but fuel pressure is 0 the pump is gone no pump runs on 0v, or