1984 Isuzu Trooper "drive front removal shaft" Questions

Ad

Question about Isuzu Trooper

1 Answer

...front drive shaft how to pull out the right front drive shaft if it was jammed? The shaft jointed to gear-box leaved inside. snap rings hold these shafts in so they simply pry out. the ring is round ...

Ad

...front wheel drive cars are the same,remove large outer nut on axle/hub with air impact or breaker bar,disconnect tie rods ,ball joints,etc so half shaft can be pulled straight out,usually with a firm ...

Ad

front drive shaft removal for 2001 izuzu trooper 4x4 it is passenger side. i have everything out of way from the shaft. what i need to know is that rather i just pry shaft out or do i need to remove a

...front axles in 1996 troopers. Isuzu changed the 4wd system from auto lock hubs to drive control axle.auto lock hube are on the older trooper's with the light and wiper switches on the dash. The same ...

Question about Isuzu Trooper

1 Answer

...drive is selected. Jack up the vehicle front and support on axle stands. Remove the wheel. Remove the brake caliper. It bolts onto the hub carrier(aka knuckle) with 2 bolts from the vehicle side of ...

...drive do i need to remove engine to pull oil pan? i have a loud banging in motor and need to check crankshaft & bearings Yes, you need to pull the engine to remove the oil pan. This requires that ...

...drive gear pulley (2) (on the left side as viewed from the front of the vehicle) and put the timing belt on the camshaft drive gear pulley. Secure the belt with a double clip or equivalent clip. ...

Question about Isuzu Trooper

1 Answer

...front drive shaft ? I need to replace the front drive shaft and am not sure how to do so? Mark the drive shaft postion to the transfer case and front axle. Remove the bolts/straps from the transfer ...

Question about Isuzu Trooper

1 Answer

front drive shaft (assuming you are talking about the front CV boots).1) Jack up the front end of the vehicle.2) Remove front wheel(s), track rod ends and slacken [don't remove completely just yet

Question about Isuzu Trooper

1 Answer

...front drive shaft remove the drive yoke off the pinion shaft remove the old seal install new seal install front drive shaft. PS check pinion bearing play before removing drive yolk. if it is loose ...

Not finding what you are looking for?
Cars & Trucks Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...