2002 Isuzu Rodeo "put alternator belt 1997" Questions

Ad

Question about Isuzu Rodeo

1 Answer

...alternator will move. Since the belts hook to other accessories, you may need to loosen them too. To get them back and the proper tension, you'll need a large screwdriver or pry bar to put tension on ...

Ad

...put on the serpentine belt back on? Usually under the hood or somewhere in the engine compartment there is a belt route diagram. Hope that helps. the belt will start by putting the outside facing on ...

Ad

Question about Isuzu Rodeo

1 Answer

...alternator to-wards the engine,put your new belt on ,fitting around the 3 pulleys once fitted look and see that the belt is in line.If your happy the belt is lined put a small bar between the engine ...

...tensioner pulley. I believe its the one between the alternator and power steering pump. Its the smaller pulley! Give it a try! how do you adjust the tensioner to put on new belt 1997 ford taurus ...

how to reinstal belt that is loose on my1997 grand caravan3.3 how to replace belt Loosen the alternator, remove the old belt, put on the new belt, tighten the alternator.

alternator/waterpump belt? And what would be the proper way to put them back on? It isn't that hard of a fix, I recently had to change the same belt on mine. Right underneath the AC is a tension bolt,

...to see routing for putting on an alternator belt for a 1997 I've followed the same route which I used to remove the belt but it's to big do you have the correct belt? Measure it against the old

Question about Mercury Cars & Trucks

1 Answer

...enough belt to put it on the alternator. The trick is to wrap the belt around all the grooved pulleys first and leave the smooth idler pulleys for last. Then the belt can just slip on the smooth ...

Question about Isuzu Rodeo

1 Answer

alternator? I had a new s belt put in my 1997 Pontiac Grand Prix and drove about 30 miles when my car broke down on the interstate. The garage where my car was towed is telling me my alternator is bad

...alternator is self grounded when installed. There is no ground wire Remove the 3 bolts holding it on unplug the wires remove belt from pully install new do not tighten yet put belt back on pully and ...

Not finding what you are looking for?
Cars & Trucks Logo

594 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Isuzu Rodeo
2001 Isuzu Rodeo

832 Questions

1999 Isuzu Rodeo
1999 Isuzu Rodeo

814 Questions

2000 Isuzu Rodeo
2000 Isuzu Rodeo

819 Questions

1998 Isuzu Rodeo
1998 Isuzu Rodeo

720 Questions

1995 Isuzu Rodeo
1995 Isuzu Rodeo

623 Questions

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...