2005 Honda Odyssey "tail light assembly" Questions

Tail Light The passenger side Tail Light Assembly on my 2007 Honda Odyssey is broken and must be replaced. I have the replacement unit in hand but can't seem to figure out how to replace the old unit.

...tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. ...

...tail light. These are snap fit covers. Use a slotted screwdriver to gently pry off the cover. You should see and be able to access each bulb/socket assembly (1 for lights, 1 for brakes). The sockets ...

...tail light housing area? open the rear hatch. On the side of the tail light assembly nearest the hatch opening, their are two flush fit flap doors molded into the trim for the tail light. Use a small ...

...tail light assembly, but it won't come out after taking the 4 nuts out. Remove 4 screws, and gently pry it off. It is held by a stick adhesive. You can place a rag over the painted body, and pry the ...

...tail light assembly of 2002 Honda odessey After removing the two screws, stand by the side of the odyssey with your back to the front of the vehicle, gently push at the light assembly with a screw ...

...tail light lens cover to change the brake lights? inside the rear cargo are are 2 pop out access flaps, remove them and peer inside. The Tail light guts are visible. Bolts to remove the entire ...

...tail light bulb - 05 Honda Odyssey 2005 odyssey tail light bulb replacement,how to do it after you remove the 2 screws? I have the same issue, removing the two screws isn't enough, there's something ...

...tail light assembly to replace lamp? I remover the two screws that attach the assembly to the rear pillar but it is still attached to something else. 1. Open the tailgate. 2. Look closely at the side ...

garnishing...To access the upper tail light...the rest of the wiring is fed in through the of the van...you will have to follow the wires...be patient....all the wires should be on the drivers side...