...to the signal from the crankshaft position sensor. The camshaft timing is out of position due to the timing chain jumped teeth. The camshaft phaser is out of position due to problems with
heading onto the freeway this morning, my 2005 PT Cruiser (Touring model) lost power and the engine block picture came up. Apparently it went into a 15 mph mode and I was able to drive it home on some
have po301 code 1 cylnder misfire whats the have po301 code #1 cylnder misfire. whats the possible cause. cars a 2005 pt cruiser. anything from bad wire .plug or fuel delivery problem to cylinder ...
problems with my timing belt, it is not broken but doesn't turn when you crank the engine. I would like any suggestions to solve my problem., I've been quoted prices from 500 to 2000 dollars to fix it
2005 PT Cruiser 2.4 no turbo auto Dying out problem Car ran Hot on freeway - replace one head gasket - replaced water pump - replaced timing belt - now the motor shakes, keeps dying out when it is in ...
TCM in a PT Cruiser 2005 I have a 2005 PT Cruiser, with 78 000 miles on it. I think I need to change the TCM, but the mechanic gave me a really high quote for the part. I am wondering if there is a ...
Question about Chrysler PT Cruiser
2005 pt cruiser has check engine light on repeatedly over past 6 months check engine light comes on and reads code PO344. have changed sensor out 3 times at dealership, check entire wiring harness, ...
engine knocking, rocking back and forth on when idling. Check if the timing is correct. You may also have a problem with a knock sensor if your timing is correct. Have these items inspected.
Question about Chrysler PT Cruiser
My 2005 PT Cruiser keeps blowing fuse 13, what is the problem The mechanics have replace the relay, checked the fuel pump and various other things and still the fuse blows and the car will not start. ...
1,289 questions posted
Usually answered in minutes!
1,198 Questions
1,147 Questions
1,007 Questions
677 Questions
582 Questions