...the engine sump to prevent damage when you jack up the engine to take the tension off the mount. Make sure you do not jack the engine up too much as you might damage the exhaust,cooling hoses
...is connected to the body by a rubber mount this keeps the engine at proper height absorbs vibration and hold engine in place.the trans axle is mounted to the sub frame with fluid filled rubber
...engine or transmission mount. With your foot on the brake and in gear, check to see if the engine if moving around excessively when you apply about 1/4 throttle. A shift of about an inch or two is ...
...causes this The motor/transaxle are mounted to the car with rubber mounts. Some movement of the engine when shifting to drive is normal. Loose or damaged mounts can allow too much movement. Also, ...
Question about Chrysler PT Cruiser
...does not effect the steering. I replaced the tires, I had the breaks checked, they are ok. Have the engine mounts checked. PTs are notorious for engine mounts breaking. I had one and went through ...
clutch and gear hard to shift in reverse First check the engine mounts! So many probs start with movement of the engine when the mounts get worn! I assume it is a manual? Frankster016
...engine mount. the front of the engine is actually the passenger side under the belts (front wheel drive engine,s sit sideways) the mount itself is cracked or the rubber insert is wiped out, you need ...
some gas in the motor is jumping around alot like 6 inches in any direction you have a broken motor mount. Which way the engine jumps will let u know which one is bad. Try this test in reverse gear to
Question about Chrysler PT Cruiser
...I also replaced the lower engine mount. The upper mount looks bad but not enough to do this. I don't know if there is a trans mount. take in for front end alignment. and yes there is a trans ...
1,289 questions posted
Usually answered in minutes!
1,198 Questions
1,147 Questions
1,007 Questions
677 Questions
582 Questions