...fault code picked up by the ECU of the engine. Use a scanner to connect it on the diagnostic socket and you will get the fault( s) and according to the fault you will work accordingly. Any need of ...
Question about Chrysler PT Cruiser
fault code remained in the OBD system. You have to clear the fault code to reset engine light.But before that, I suppose to have your car checked first to make sure there's nothing wrong.Good luck
...fault code in the ECU with information on what is wrong. You can only access this information via a diagnostic device. If the DME (engine) ECU keeps on seeing a fault on the engine operation it then ...
Question about Chrysler PT Cruiser
...fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner ...
Engine light staying on Engine light came on and is staying on... What could it be!!! check the oil and coolant levels . Have the fault codes read to find which sensor recorded a fault.
...code set to make the engine control module turn the service engine light on because there are fault codes stored in the transmission control module. The p0882 is for power input low to t.c.m. Check ...
...fault code on PT cruiser...power steering?? PO551 fault code on PT cruiser...power steering pressure switch. Engine light has now gone off, do I still replace or is it just acting up? i would check ...
Question about Chrysler PT Cruiser
...fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic ...
Question about Chrysler PT Cruiser
...came on replaced sensor but light came back on with crank sensor code The check engine light is still on because the fault identified by the computer was not caused by a failed crank position
Question about Chrysler PT Cruiser
...motor 1- circuit malfunction p063a is not a valid fault code. To find the possible causes of the codes go to the link, put the code in the upper right search window and click "Search Engine
1,289 questions posted
Usually answered in minutes!
1,198 Questions
1,147 Questions
1,007 Questions
677 Questions
582 Questions