2003 Chrysler PT Cruiser "accord 2 engine timing" Questions

Engine Light (C.E.L. or CEL) 2) Insert key into ignition 3) turn key to "on" posittion without starting the vehicle 4) VERY VERY quickly turn the key off one click, then on, then off, then on; cycling

...engine mount. It is about 1 1/2 feet long, sits below the accessory pulleys and is made out of aluminum with a rubber insert in the foward end (the rubber insert is broken) Is this common? Thank you ...

...engine and trans have warmed up to operating temperature. I had been to Chrysler dealer 2 times to it by the same problem and they only thing that have done is to up date the computer and review the ...

...accord engine mount is in the way Is it in the way of access to the timing belt cover? If so, remove the bolt, and let the engine drop down. You may have to loosen the other Mounts and physically ...

accord Locate the crankshaft pulley at the front of the engine and remove any grease or dirt to expose the timing marks. Turn off any accessories such as the radio, climate controls and lights. Step 2

...accord. How to dismantling and change timing belt for CB7 engine: 1. remove elektrik power (+) from accumulator 2. put suport on below engine 3. remove the bolt and left engine mounting 4. remove ...

...accord timing cover, the oil pump, crank seal, cam seal, and the 2 balancer seals. Most of the time its the front balancer seal that has popped out and will need to be replace and have and retaining ...

...2), and water pump in my 2000 Honda Accord and it hums. It hums when in idle and hums louder when accelerating. No check engine light. The engine is in time (I think). Please Help! sounds like your ...

...accord timing markings The timing marks for that car is located between the engine and transmission. There is a rubber plug(appx.2" long) on the front of the tranny bell housing, directly below the ...

...accord lx has engine swap to JDM h22a always runs great but occasionaly it wont start,which is due to lack of spark....replaced plugs,wires,distibutor 4 times,coil twice,fuel pump always runs and ...