...serpentine belt 96 town & country, also does the tensioner ever freeze up? Any bearing mounted pulley can "freeze" if a bearing wears out. The most common result it it can burn up a belt which ...
Question about Chrysler Town & Country
...serpentine belt I cannot seem to have enough room between the wheelwell & belt tensioner to get a rachet in the hole to release the tension & to get the belt off. I have drop the motor down. ...
...belt or a serpentine belt? If it is a regular drive belt, are you tightening the belt to the proper deflection. Mid way from the two pulleys you press the belt firmly and you should have no more than ...
...serpentine belt. With the motor idling, lightly spray the serpentine belt as it's spinning with WD-40 or other oil based lubricant (Don't spray near the alternator). If this doesn't work, turn the ...
serpentine belt off? & 3.8L Engines All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic tensioner
Question about Chrysler Town & Country
...serpentine belt which is pulled tightly by the tensioner pulley, hint the name "tension" pulley. If this is defective you will experience the problems/symptoms you have listed, hard steering, over ...
...serpentine belt serviced ever? it may be time for a new serpentine belt? It could also mean your serpentine idler pully bearings may be getting ready to go, the alternator may be getting ready to buy ...
Question about Chrysler Town & Country
turn or start. Compressor seized? Would that stop the engine from turning over? Yes.If you take the serpentine belt off, the engine may start.But you may not have a working water pump without the belt
Serpentine belt Town & Country I need to replace a shredded serpentine belt in my 2001 town and country...I can't find a diagram and can't figure out how to put it on. It should show the diagram ...
Question about Chrysler Town & Country
serpentine belt from fallen off the tensioner on a 1993 town & country. Is there a aftermarket pulley wheel for that tensioner to replace the flaw problems. I noticed when I splash through puddles
645 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions
